UK Mains Power Adapter for smaller Meade telescopes

Power your Meade telescope from the mains.

  • For Meade telescopes with 12V power input
  • Replaces batteries
  • Volt: 12V DC
  • Amp: 2A
  • Power Out Pin: 2.5mm
  • Switch mode & regulated
  • UK warranty
UK Mains Power Adapter for smaller Meade telescopes
  • Product code: 68027
  • Availability: In stock
  • Despatch: 2 business days
  • Retail Price: £ 21.95
Shipping rates
England & Wales
£ 4.00
Scotland Central & South
£ 4.00
Scotland North
£ 4.00
Northern Ireland
£ 4.00
UK islands (from)
£ 4.00
European Union (from)
£ 10.00
Worldwide (from)
£ 12.00

Description

Recommended for use with light to medium motorised and computerised telescopes that require 12 volt power such as the ETX125 Observer and the StarNavigator NG series. It comes with a 2m mains UK type power lead with a total reach of 3m.

Compatible telescopes:

  • StarNavigator NG
  • ETX125 Observer

Note: This is not a Meade Instruments product.


U.K. WARRANTY

POWER

ADAPTER

ACCESSORY
▼ read more ▼

A high quality 12VDC switch-mode regulated power supply rated at 24 Watt maximum. The power supply has a wide range 90-264vac 47/63Hz input for world use and features short circuit, over voltage and over load current protection, some of these features are not found in more affordable models.

Not compatible with the following models:

  • ETX80 Observer (requires 9V power)
  • ETX90 Observer (requires 9V power)
  • StarNavigator (non-NG models require 9V power)
  • DS-2000 (requires 9V power)

Caution

Please ensure that the power (Watts) required by the equipment connected to any power supply is below the power output rating of the power supply used. This will prolong the life of the equipment and that of the power supply. As a rule of thumb your power supply should be able to supply 25% more power than is required by the device(s) connected to it for best performance.

Carries full one year UK warranty.

▲ read less ▲
▼ show specification ▼
UK Mains Power Adapter for smaller Meade telescopes
Attribute Specification
Product Code (SKU) 68027
Universal Product Code (UPC) n/a
Warranty 1 year UK warranty
Experience Level Beginner
Input 90-264VAC 47/63Hz via 2 pin C8
Output 12VDC 2A maximum, 24W
Plug 2.5mm pin (+ve)
Safety Approvals BSMI, CB, cUL, UL, GS, PSE
Efficiency Meets Energy Efficiency Level IV & CEC
EMI RCM, CE / FCC Class B Conduction & Radiation
MTBF 100,000 hours minimum at 25° C
Mains cable total length 2m approximately
12VDC power lead (with ferrite core) total length 1m approximately
Telescope Compatibility • Meade StarNavigator NG
• Meade ETX125 Observer
▲ hide specification ▲
Products
Similar products
  • Product code: 606004
  • Availability: In stock
  • Despatch: 2 business days
  •  
  • Product code: 68012
  • Availability: In stock
  • Despatch: 2 business days
  •  
  • Product code: 68026
  • Availability: In stock
  • Despatch: 2 business days
  •  
  • Product code: 07584
  • Availability: Out of stock
  • Incoming: To be confirmed
  •  
GBP £ 55.80 (inc VAT)
out of stock
  • Product code: 07043
  • Availability: In stock
  • Despatch: 2 business days
  •  
  • Product code: 68028
  • Availability: In stock
  • Despatch: 2 business days
  •  
Support
Documents
15.2 MB • 07 April 2019
0.2 MB • 15 February 2020
Links